Duralar Technology Enables
Much Faster Deposition

Coating deposition speed is one of the important competitive advantages of Duralar coatings. Prior to Duralar it was not practical to apply deposition coatings that were thick enough to replace hard chrome or HVOF (High Velocity Oxy Fuel) coatings, because depositing the necessary thickness could take an entire day!

Bigger building blocks

However, Duralar coatings are comprised of relatively large molecules — think of them as “bigger building blocks.” This means they can create thicker coatings much faster — often 4 to 5 times faster — than many other competitive coatings, such as conventional PVD (Physical Vapor Deposition), for example. So a process that might have taken a full day can now be completed with Duralar in just a few hours.

And that’s not all…

Putting you in control

With state-of-the-art Duralar coating systems in your own production line you can dramatically streamline your product cycles and eliminate the time and expense of shipping to remote coating vendors. Plus, you’ll gain the efficiencies of coating just in time rather than in batches. So you’ll finally have complete control of the coating process and your final product.

Bottom line: whether your requirement is for thicker or thinner coatings, all can be deposited faster with Duralar; and with your own high-efficiency Duralar systems in place you can shorten schedules and maximize product quality. So, with faster cycle times and a higher quality product you can reduce your production costs — and increase your profits!